Shanghai Mitsubishi lifts: shaft dimensions
China · Shanghai. 4 series, 54 sizes. Rated load from 320 to 1,600 kg, shaft width 1480–2650 mm, depth 1400–2770 mm.
About the manufacturer
Shanghai Mitsubishi Elevator Co., Ltd., founded in January 1987. A joint venture: the Chinese side holds 52% and operational control, Mitsubishi Electric is the foreign partner. Declared: deliveries to 100+ countries, 1.4 million lifts in service, 95 direct branches, 800+ partner agents, 700+ service points. Record: Shanghai Tower, 20.5 m/s.
CERTIFICATION IN RUSSIA. Russian dealers publish valid TR CU certificates: for ELENESSA — electric passenger lifts without machine room, gearless, with variable-speed drive, capacity up to and including 1,600 kg, speed up to and including 1.75 m/s; for LEHY — lifts with machine room, gearless, capacity up to and including 1,600 kg, speed up to and including 3.0 m/s; for K TYPE escalators — up to 0.65 m/s, incline up to 30°, rise up to 15 m. The certificates are dated 2019: before signing, check whether they are still valid and who the holder is.
ELENESSA VERTICAL DIMENSIONS (min. headroom OH / min. pit PD, from the Russian catalogue):
• 1.0 m/s, 320–1,050 kg: travel up to 30 m — 3650 / 1300; 30–60 m — 3650 / 1300. Up to 22 stops.
• 1.0 m/s, 1,050–1,600 kg: up to 30 m — 4100 / 1550; 30–60 m — 4200 / 1650. Up to 22 stops.
• 1.6 m/s, 450–1,050 kg: up to 30 m — 3750 / 1400; 30–60 m — 3800 / 1400; 60–80 m — 3850 / 1400. Up to 30 stops.
• 1.6 m/s, 1,050–1,600 kg: up to 30 m — 4250 / 1650; 30–60 m — 4350 / 1750; 60–70 m — 4400 / 1800. Up to 26 stops.
• 1.75 m/s, 450–1,050 kg: up to 30 m — 3850 / 1450; 30–60 m — 3900 / 1450; 60–80 m — 3950 / 1450. Up to 30 stops.
• 1.75 m/s, 1,050–1,600 kg: up to 30 m — 4350 / 1700; 30–60 m — 4450 / 1800; 60–70 m — 4500 / 1850. Up to 26 stops.
Minimum floor-to-floor distance 2,600 mm. Rated capacity is calculated at 75 kg per person. The minimum shaft sizes apply only without counterweight safety gear and without fire-rated doors. The control cabinet is 98 mm thick and the car operating panel 25 mm — no separate room is needed.
LEHY-III — LIFT WITH MACHINE ROOM, RUSSIAN CATALOGUE. The dealer's open library has a Russian-language LEHY-III catalogue (44 pages) with a “Construction table”. Car and door opening by specification code were verified from it:
• P08W — 630 kg, car 1400×1100, centre-opening door 800/900, telescopic 800/900
• P08D — 630 kg, car 1100×1400, centre-opening door 800/900, telescopic 800/900
• P11W — 825 kg, car 1400×1350, centre-opening door 800/900, telescopic 900
• P11D — 825 kg, car 1100×1700, centre-opening door 800/900, telescopic 800/900
• P14G — 1,050 kg, car 1600×1500, centre-opening door 900/1000, telescopic 900
• P14D — 1,050 kg, car 1100×2100, centre-opening door 800/900, telescopic 800/900
• P14R — 1,050 kg, car 2100×1100, telescopic door 1200/1300
• P16W — 1,200 kg, car 1800×1450, centre-opening door 1000/1100, telescopic 1000
• P16D — 1,200 kg, car 1250×2100, centre-opening door 1000, telescopic 1000
• P18G — 1,350 kg, car 2000×1500, centre-opening door 1100/1200
Door height in all versions is 2,100–2,400 mm.
LEHY-III is not yet in the selector for two reasons. First, the shaft width and depth in the table are not a single value but a set of variants for each combination of counterweight position, door type, through or single-entrance car and speed — transferring this by eye from a scan is not acceptable. Second, the top floor height and pit depth are not given in the table at all; it refers to a separate construction drawing LEHY-III-94, which is not publicly available. Both documents have been requested from the dealer.
OTHER PASSENGER SERIES FOR RUSSIA (no layout dimensions publicly available): LEHY-II — with machine room, VVVF gearless machine, 630 and 1,350 kg, 1.0–2.5 m/s, travel up to 120 m, up to 32 stops, the standard solution for replacing old Russian lifts with machine rooms. GPS-III — premium segment with intelligent group control. HOPE-IIG — freight lifts with a modular component system. J and K series escalators, moving walks with an incline of 0–12° and a 900 / 1,200 / 1,600 mm pallet width.
The selector includes ELENESSA and two home lift series for which dimensions are published. Everything else is on request.
OTHER HOME LIFT MODELS (the website gives only limit values, so they are not in the selector):
• LEON-BL(V) — up to 400 kg, speeds 0.4 / 0.63 / 1.0 m/s, car up to 1,300 mm in width or depth, area up to 1.6 m², door up to 900 mm. Minimum shaft 1280×1145 mm, minimum headroom 2,700 mm, minimum pit 100 mm (at 0.4 m/s with an aluminium honeycomb car floor). Flat steel belt drive, noise below 50 dB. Factory retail price in China: 2 stops from 115,999 yuan including installation.
• Hailing (海菱), a platform home lift with an integrated shaft — no separate shaft needed. Up to 320 kg, car 778–1,025 mm wide and 595–1,042 mm deep, door 700–900 mm, through and corner doors, rear or side counterweight. Minimum shaft 950×950 mm, pit 100 mm, headroom = car height plus 350 mm. The aluminium shaft is installed in a floor opening, in a stairwell or in the corner of a room.
• LEHY-L-S(V) — 320 / 450 / 550 / 630 kg, speed from 0.4 to 1.0 m/s, 2–8 stops (at 0.4 m/s — up to 7 stops and travel up to 20 m). Layout dimensions are not published on the website.
PASSENGER SERIES (ELENESSA machine-room-less, LEHY-Pro, LEHY-L-Pro, MAXIEZ-LZ/CZ/B, panoramic): the website has only descriptions, no layout tables — the “资料下载” section serves files only after login. An important ELENESSA option is SETS, electronic forced deceleration at the terminal floors: it reduces the required pit and headroom, including when replacing a lift in an existing building. It does not work at 1 m/s without the variable speed function.
FOR RUSSIA, BE SURE TO CHECK BEFORE SIGNING: who imports the equipment, who holds the TR CU certificate, and on what terms the Mitsubishi trademark is used — MAXIEZ-LZ(V) is sold in China directly under the Mitsubishi Electric brand.
Questions about the brand — info@liftoteka.ru.
Series
Updated: 22 September 2026