Liftoteka lift shaft dimensions and standards for designers
🌐 EN
РусскийEnglish中文Türkçe
Home → Manufacturers → KMZ (Karacharovsky Mechanical Plant) → KMZ-PEGAS

KMZ (Karacharovsky Mechanical Plant) KMZ-PEGAS

Pegas LP-P — passenger with machine room. 240–400 kg, cars 800×1050, 950×1100, 1000×1100 and 1100×1100, centre-opening and telescopic doors, side or rear counterweight. Travel up to 60 m at 0.71–1.0 m/s and up to 85 m at 1.6. Shaft is the minimum per the plant sheet. 10 sizes, rated load 320–400 kg, with machine room.

Pit 1150–1250 mm, headroom 3400–3600 mm. Manufacturer — KMZ (Karacharovsky Mechanical Plant), Russia · Moscow.

Liftoteka is an independent reference. We are not a dealer, representative, authorised partner or service centre of KMZ (Karacharovsky Mechanical Plant) and do not sell this equipment. The name and trademark KMZ (Karacharovsky Mechanical Plant) belong to their owner and are used solely to identify the equipment whose dimensions are listed. Data are taken from the manufacturer's open catalogues.
SeriesShaft clear b3×d2, mmCapacityCar b1×d1, mmHeadroom h1, mmPit d3, mmSpeedClear door opening b2×h3Door typeFound an error?
KMZ-PEGAS1240 × 1600320 kg800 × 1050340011500.71 / 1 m/s650 × 2000 mm; structural opening 770 mmtelescopic · rear counterweightreport
KMZ-PEGAS1420 × 1600400 kg950 × 11003400–36001150–12501 / 1.6 m/s650 × 2000 mm; structural opening 800 mmcentre opening · rear counterweightreport
KMZ-PEGAS1520 × 1600400 kg950 × 11003400–36001150–12501 / 1.6 m/s700 × 2000 mm; structural opening 850 mmcentre opening · rear counterweightreport
KMZ-PEGAS1600 × 1450400 kg950 × 11003400–36001150–12501 / 1.6 m/s650 × 2000 mm; structural opening 800 mmcentre opening · side counterweightreport
KMZ-PEGAS1650 × 1450400 kg950 × 11003400–36001150–12501 / 1.6 m/s700 × 2000 mm; structural opening 850 mmcentre opening · side counterweightreport
KMZ-PEGAS1350 × 1700400 kg950 × 11003400–36001150–12500.71 / 1 / 1.6 m/s700 × 2000 mm; structural opening 850 mmtelescopic · rear counterweightreport
KMZ-PEGAS1500 × 1520400 kg950 × 11003400–36001150–12500.71 / 1 / 1.6 m/s700 × 2000 mm; structural opening 850 mmtelescopic · side counterweightreport
KMZ-PEGAS1480 × 1700400 kg1000 × 11003400–36001150–12500.71 / 1 / 1.6 m/s800 × 2000 mm; structural opening 920 mmtelescopic · rear counterweightreport
KMZ-PEGAS1550 × 1550400 kg1000 × 11003400–36001150–12501 / 1.6 m/s800 × 2000 mm; structural opening 920 mmtelescopic · side counterweightreport
KMZ-PEGAS1700 × 1650400 kg1100 × 11003400–36001150–12501 / 1.6 m/s800 × 2000 mm; structural opening 950 mmcentre opening · rear counterweightreport

Data source: Pegas building design briefs LP-P0320, LP-P0401 and LP-P0411 (eight sheets, published by the plant on BIMLIB). Added to the reference: 18.09.2026.
If a figure differs from the manufacturer's document, click “report” in the row — an email opens with the model and dimensions already filled in.

Shaft sizes are clear internal dimensions. “Per layout sheet” means the manufacturer does not publish this value in the catalogue and provides it for a specific project.

Updated: 22 September 2026