Liftoteka lift shaft dimensions and standards for designers
🌐 EN
РусскийEnglish中文Türkçe
Home → Shaft sizes → 5,000 kg

5,000 kg lift shaft

Lift with a rated load of 5,000 kg — 12 sizes from 4 manufacturers. Shaft width from 3600 to 4750 mm, depth from 3120 to 7900 mm.

Pit for this load — from 1300 to 2000 mm, headroom — from 4200 to 6100 mm. The spread is explained by speed: the higher the rated speed, the longer the travel to the buffer below and the safety clearance above. Manufacturers in the table: FUJIHD, LINVOL, Sicher / SRH, Tenau.

BrandSeriesShaft clear b3×d2, mmCapacityCar b1×d1, mmHeadroom h1, mmPit d3, mmSpeed
FUJIHDFJ-CAR4750 × 75605000 kg3500 × 7200480016000.25 / 0.5 m/s
FUJIHDFJ-FREIGHT4200 × 38005000 kg2800 × 3400500016000.25 / 0.5 m/s
FUJIHDFJ-FREIGHT-MRL4250 × 38005000 kg2800 × 3400610016000.5 m/s
LINVOLLV-LTHW4000 × 31205000 kg · 66 pers.2600 × 2650500018001 m/s
LINVOLLV-LTHW3600 × 71005000 kg · 66 pers.2100 × 6500600020001 m/s
LINVOLLV-LTHX3750 × 42005000 kg · 66 pers.2500 × 3400420013000.5 m/s
LINVOLLV-LTHX4000 × 67505000 kg · 66 pers.2500 × 6000490015000.5 m/s
Sicher / SRHGRA104400 × 66005000 kg2700 × 6000480017000.25 m/s
Sicher / SRHGRF4000 × 41005000 kg2400 × 3600460016000.25 m/s
Sicher / SRHGRFH104000 × 40505000 kg2400 × 3600450017000.25 m/s
TenauTN-CAR4700 × 79005000 kg · 66 pers.3400 × 7250460017000.5 m/s
TenauTN-FRT4000 × 41005000 kg · 66 pers.2400 × 3600440015000.5 / 1 m/s
Shaft size is the clear internal size of the finished opening. Allow for finishes, plaster and concrete tolerances on top of these figures.

Related

Updated: 22 September 2026