Liftoteka lift shaft dimensions and standards for designers
🌐 EN
РусскийEnglish中文Türkçe
Home → Shaft sizes → 3,000 kg

3,000 kg lift shaft

Lift with a rated load of 3,000 kg — 12 sizes from 4 manufacturers. Shaft width from 2800 to 4400 mm, depth from 2660 to 6300 mm.

Pit for this load — from 1400 to 1700 mm, headroom — from 4200 to 5100 mm. The spread is explained by speed: the higher the rated speed, the longer the travel to the buffer below and the safety clearance above. Manufacturers in the table: FUJIHD, LINVOL, Sicher / SRH, Tenau.

BrandSeriesShaft clear b3×d2, mmCapacityCar b1×d1, mmHeadroom h1, mmPit d3, mmSpeed
FUJIHDFJ-CAR4100 × 61603000 kg2700 × 5800480016000.25 / 0.5 m/s
FUJIHDFJ-FREIGHT3300 × 34103000 kg2070 × 3050450015000.25 / 0.5 m/s
FUJIHDFJ-FREIGHT-MRL3700 × 30003000 kg2470 × 2560500016000.5 m/s
LINVOLLV-LTHW3660 × 26603000 kg · 40 pers.2400 × 2200510014001 m/s
LINVOLLV-LTHW2800 × 40003000 kg · 40 pers.1500 × 3500500015000.5 m/s
Sicher / SRHGRA104400 × 61003000 kg2700 × 5500480017000.5 m/s
Sicher / SRHGRF3400 × 34003000 kg2000 × 2900440015000.5 m/s
Sicher / SRHGRFH103400 × 33503000 kg2000 × 2900420015500.25 m/s
Sicher / SRHGRFN3550 × 35003000 kg2000 × 2900500017000.5 m/s
TenauTN-CAR4200 × 63003000 kg · 40 pers.2700 × 5500450017000.5 m/s
TenauTN-FRT3450 × 34003000 kg · 40 pers.2000 × 2900430014000.5 / 1 m/s
TenauTN-FRT-MRL3600 × 34003000 kg · 40 pers.2000 × 2900450015000.5 / 1 m/s
Shaft size is the clear internal size of the finished opening. Allow for finishes, plaster and concrete tolerances on top of these figures.

Related

Updated: 22 September 2026