XIZI Elevator XZ-MRL
UN-Victor MRL, machine-room-less. Gearless machine in the shaft, speeds 1.0–1.75 m/s, rated load 630–1,600 kg. Car size is clear internal. Source: the factory's Russian-language catalogue “Passenger lift”, civil drawing section, catalogue p. 46 (sent by the factory 23.09.2026). 7 sizes, rated load 630–1,600 kg, machine-room-less (MRL).
Pit 1400–1600 mm, headroom 4150–4700 mm. Manufacturer — XIZI Elevator, China · Hangzhou.
Liftoteka is an independent reference. We are not a dealer, representative, authorised partner or service centre of XIZI Elevator and do not sell this equipment. The name and trademark XIZI Elevator belong to their owner and are used solely to identify the equipment whose dimensions are listed. Data are taken from the manufacturer's open catalogues.
| Series | Shaft clear b3×d2, mm | Capacity | Car b1×d1, mm | Headroom h1, mm | Pit d3, mm | Speed | Clear door opening b2×h3 | Door type | Found an error? |
|---|---|---|---|---|---|---|---|---|---|
| XZ-MRL | 1800 × 1800 | 630 kg · 8 pers. | 1050 × 1400 | 4150–4500 | 1400–1450 | 1 / 1.5 / 1.75 m/s | 700 × 2100 mm | centre opening | report |
| XZ-MRL | 2000 × 1800 | 800 kg · 10 pers. | 1350 × 1400 | 4150–4500 | 1400–1450 | 1 / 1.5 / 1.75 m/s | 800 × 2100 mm | centre opening | report |
| XZ-MRL | 2250 × 1800 | 1000 kg · 13 pers. | 1600 × 1400 | 4150–4500 | 1400–1450 | 1 / 1.5 / 1.75 m/s | 900 × 2100 mm | centre opening | report |
| XZ-MRL | 2250 × 1900 | 1050 kg · 14 pers. | 1600 × 1500 | 4150–4500 | 1400–1450 | 1 / 1.5 / 1.75 m/s | 900 × 2100 mm | centre opening | report |
| XZ-MRL | 2400 × 2050 | 1150 kg · 15 pers. | 1600 × 1650 | 4450–4700 | 1450–1600 | 1 / 1.5 / 1.75 m/s | 900 × 2100 mm | centre opening | report |
| XZ-MRL | 2500 × 2150 | 1350 kg · 18 pers. | 1700 × 1750 | 4450–4700 | 1450–1600 | 1 / 1.5 / 1.75 m/s | 1000 × 2100 mm | centre opening | report |
| XZ-MRL | 2800 × 2150 | 1600 kg · 21 pers. | 2000 × 1750 | 4450–4700 | 1450–1600 | 1 / 1.5 / 1.75 m/s | 1100 × 2100 mm | centre opening | report |
Data source: factory catalogues, “土建图 / layout drawing” pages. Added to the reference: 14.09.2026.
If a figure differs from the manufacturer's document, click “report” in the row — an email opens with the model and dimensions already filled in.
Shaft sizes are clear internal dimensions. “Per layout sheet” means the manufacturer
does not publish this value in the catalogue and provides it for a specific project.
Updated: 22 September 2026