Liftoteka lift shaft dimensions and standards for designers
🌐 EN
РусскийEnglish中文Türkçe
Home → Manufacturers → Mogilevliftmash

Mogilevliftmash lifts: shaft dimensions

Belarus · EAEU. 10 series, 113 sizes. Rated load from 250 to 3,200 kg, shaft width 1150–2850 mm, depth 1100–3200 mm.

Liftoteka is an independent reference. We are not a dealer, representative, authorised partner or service centre of Mogilevliftmash and do not sell this equipment. The name and trademark Mogilevliftmash belong to their owner and are used solely to identify the equipment whose dimensions are listed. Data are taken from the manufacturer's open catalogues.

About the manufacturer

OJSC Mogilevliftmash. Full layout tables with sheets in PDF and DWG are published on the plant's website. An EAEU country — the restrictions of Decree No. 616 on foreign equipment do not apply in the same way as to non-EAEU countries; the status for a specific tender must be confirmed separately. Shaft, pit and headroom were taken from these albums: 170 albums in 16 categories were processed, from small goods lifts to 2.5 m/s high-speed lifts. The album sizes are minimums; for machine-room-less, hospital and high-speed lifts the shaft is given as a min…max range — the table shows the lower limit. The plant gives the pit as a range (for example 1,200–1,650 mm); the table shows the lower limit, and a pit deeper than the upper limit requires a plinth under the landing door. The albums assume a counterweight without safety gear: if there is an accessible space under the pit, the layout must be agreed with the plant.

Questions about the brand — info@liftoteka.ru.

Series

MLM-VMPPassenger with overhead machine room · 45 sizesMLM-MGMPPassenger with compact machine room · 11 sizesMLM-PROHPassenger with through car · 8 sizesMLM-BMPPassenger, machine-room-less · 11 sizesMLM-PANPanoramic · 9 sizesMLM-SKORHigh-speed 2.5 m/s · 3 sizesMLM-LPUHospital · 5 sizesMLM-GRFreight with overhead machine room · 7 sizesMLM-GR-NFreight with bottom machine room · 12 sizesMLM-MGRSmall goods lift · 2 sizes
All dimensions are taken from the manufacturer's catalogue. Before issuing working drawings, request the manufacturer's layout sheet for the specific project — the layout changes with the number of stops, counterweight position and door type.

Updated: 22 September 2026