Liftoteka lift shaft dimensions and standards for designers
🌐 EN
РусскийEnglish中文Türkçe
Home → Manufacturers → Metron → MTR-MRL

Metron MTR-MRL

Passenger lift, machine-room-less, side counterweight. The plant’s standard layout, 450–2,000 kg: horizontal machine, sheave on the car roof, counterweight at the side. Machine-room-less. Each row covers two speeds: 1.0 m/s up to 45 m (15 floors) and 1.75 m/s up to 60 m (20 floors), each with its own top-floor height and pit. Doors: S/O — side opening, C/O — centre opening. Car height 2,200 mm (up to 1,000 kg) and 2,100 mm (1,250–2,000 kg). 1,000 kg comes in three versions: 2100×1100, 1100×2100 and 1400×1600. Source: plant dimension table “Metron parameter table RU” (1 sheet), sent by the plant on 28.09.2026. 9 sizes, rated load 450–2,000 kg, machine-room-less (MRL).

Pit 1200–1300 mm, headroom 4000–4300 mm. Manufacturer — Metron, China · Huzhou.

Liftoteka is an independent reference. We are not a dealer, representative, authorised partner or service centre of Metron and do not sell this equipment. The name and trademark Metron belong to their owner and are used solely to identify the equipment whose dimensions are listed. Data are taken from the manufacturer's open catalogues.
SeriesShaft clear b3×d2, mmCapacityCar b1×d1, mmHeadroom h1, mmPit d3, mmSpeedClear door opening b2×h3Door typeFound an error?
MTR-MRL1700 × 1500450 kg · 6 pers.1100 × 11004000–42001200–13001 / 1.75 m/s900 × 2100 mmside openingreport
MTR-MRL2000 × 1450630 kg · 8 pers.1400 × 11004000–42001200–13001 / 1.75 m/s900 × 2100 mmcentre openingreport
MTR-MRL2000 × 1700800 kg · 10 pers.1400 × 13504000–42001200–13001 / 1.75 m/s900 × 2100 mmcentre openingreport
MTR-MRL2700 × 14501000 kg · 13 pers.2100 × 11004000–42001200–13001 / 1.75 m/s1200 × 2100 mmcentre openingreport
MTR-MRL1700 × 25001000 kg · 13 pers.1100 × 21004000–42001200–13001 / 1.75 m/s900 × 2100 mmside openingreport
MTR-MRL2000 × 19501000 kg · 13 pers.1400 × 16004000–42001200–13001 / 1.75 m/s900 × 2100 mmcentre openingreport
MTR-MRL2000 × 24501250 kg · 16 pers.1400 × 20004000–42001200–13001 / 1.75 m/s1100 × 2000 mmside openingreport
MTR-MRL2200 × 26501600 kg · 21 pers.1550 × 22004000–42001200–13001 / 1.75 m/s1200 × 2000 mmside openingreport
MTR-MRL2400 × 28502000 kg · 26 pers.1700 × 24004100–43001200–13001 / 1.75 m/s1300 × 2000 mmside openingreport

Data source: plant dimension table “Metron parameter table RU” (1 sheet, machine-room-less passenger lifts). Added to the reference: 28.09.2026.
If a figure differs from the manufacturer's document, click “report” in the row — an email opens with the model and dimensions already filled in.

Shaft sizes are clear internal dimensions. “Per layout sheet” means the manufacturer does not publish this value in the catalogue and provides it for a specific project.

Updated: 22 September 2026