Liftoteka lift shaft dimensions and standards for designers
🌐 EN
РусскийEnglish中文Türkçe
Home → Manufacturers → Metron → MTR-MRL-S

Metron MTR-MRL-S

Passenger lift, machine-room-less, for a small shaft. “Solutions for a small shaft” from the same table, 450–1,000 kg: a narrower or shorter shaft than the standard layout for the same load. Machine-room-less. Each row covers two speeds: 1.0 m/s up to 45 m (15 floors) and 1.75 m/s up to 60 m (20 floors), each with its own top-floor height and pit. Doors: S/O — side opening, C/O — centre opening. Car height 2,200 mm. Source: plant dimension table “Metron parameter table RU” (1 sheet), sent by the plant on 28.09.2026. 5 sizes, rated load 450–1,000 kg, machine-room-less (MRL).

Pit 1200–1300 mm, headroom 4000–4200 mm. Manufacturer — Metron, China · Huzhou.

Liftoteka is an independent reference. We are not a dealer, representative, authorised partner or service centre of Metron and do not sell this equipment. The name and trademark Metron belong to their owner and are used solely to identify the equipment whose dimensions are listed. Data are taken from the manufacturer's open catalogues.
SeriesShaft clear b3×d2, mmCapacityCar b1×d1, mmHeadroom h1, mmPit d3, mmSpeedClear door opening b2×h3Door typeFound an error?
MTR-MRL-S1600 × 1600450 kg · 6 pers.1100 × 12004000–42001200–13001 / 1.75 m/s900 × 2100 mmside openingreport
MTR-MRL-S1900 × 1500630 kg · 8 pers.1400 × 11004000–42001200–13001 / 1.75 m/s900 × 2100 mmside openingreport
MTR-MRL-S1900 × 1750800 kg · 10 pers.1400 × 13504000–42001200–13001 / 1.75 m/s900 × 2100 mmside openingreport
MTR-MRL-S2600 × 14501000 kg · 13 pers.2100 × 11004000–42001200–13001 / 1.75 m/s1200 × 2100 mmcentre openingreport
MTR-MRL-S2100 × 17501000 kg · 13 pers.1600 × 14004000–42001200–13001 / 1.75 m/s900 × 2100 mmcentre openingreport

Data source: plant dimension table “Metron parameter table RU” (1 sheet, machine-room-less passenger lifts). Added to the reference: 28.09.2026.
If a figure differs from the manufacturer's document, click “report” in the row — an email opens with the model and dimensions already filled in.

Shaft sizes are clear internal dimensions. “Per layout sheet” means the manufacturer does not publish this value in the catalogue and provides it for a specific project.

Updated: 22 September 2026