HAS Elevator HAS-MR-1-1
With machine room, 1:1 roping. Geared worm-drive machine, speed 1.0 m/s, travel up to 90 m, up to 30 stops. Single entrance. 7 sizes, rated load 320–1,000 kg, with machine room.
Pit 1100–1350 mm, headroom 3400–3800 mm. Manufacturer — HAS Elevator, Turkey · Bursa · Kestel.
Liftoteka is an independent reference. We are not a dealer, representative, authorised partner or service centre of HAS Elevator and do not sell this equipment. The name and trademark HAS Elevator belong to their owner and are used solely to identify the equipment whose dimensions are listed. Data are taken from the manufacturer's open catalogues.
| Series | Shaft clear b3×d2, mm | Capacity | Car b1×d1, mm | Headroom h1, mm | Pit d3, mm | Speed | Clear door opening b2×h3 | Door type | Found an error? |
|---|---|---|---|---|---|---|---|---|---|
| HAS-MR-1-1 | 1400 × 1500 | 320 kg · 4 pers. | 1050 × 900 | 3800 | 1350 | 1 m/s | 700 × 2000 mm | automatic, single entrance | report |
| HAS-MR-1-1 | 1350 × 1850 | 450 kg · 6 pers. | 1000 × 1250 | 3400 | 1100 | 1 m/s | 700 × 2000 mm | automatic, single entrance | report |
| HAS-MR-1-1 | 1450 × 1700 | 450 kg · 6 pers. | 1100 × 1100 | 3800 | 1100 | 1 m/s | 800 × 2000 mm | automatic, single entrance | report |
| HAS-MR-1-1 | 1600 × 1900 | 630 kg · 8 pers. | 1250 × 1300 | 3400 | 1100 | 1 m/s | 900 × 2000 mm | automatic, single entrance | report |
| HAS-MR-1-1 | 1500 × 2000 | 630 kg · 8 pers. | 1100 × 1400 | 3400 | 1100 | 1 m/s | 800 × 2000 mm | automatic, single entrance | report |
| HAS-MR-1-1 | 1700 × 2000 | 800 kg · 10 pers. | 1350 × 1400 | 3400 | 1100 | 1 m/s | 900 × 2000 mm | automatic, single entrance | report |
| HAS-MR-1-1 | 1750 × 2200 | 1000 kg · 13 pers. | 1400 × 1600 | 3400 | 1100 | 1 m/s | 900 × 2000 mm | automatic, single entrance | report |
Data source: HAS Elevator “Complete Elevator Systems” catalogue, tables on pp. 13–17 (checked 18.09.2026). Added to the reference: 18.09.2026.
If a figure differs from the manufacturer's document, click “report” in the row — an email opens with the model and dimensions already filled in.
Shaft sizes are clear internal dimensions. “Per layout sheet” means the manufacturer
does not publish this value in the catalogue and provides it for a specific project.
Updated: 22 September 2026