FUJIHD FJ-OBS-SC
Panoramic lift, semicircular car. Semicircular glazing, two-panel centre-opening doors. Machine room height 2,500 mm. 7 sizes, rated load 630–2,000 kg, with machine room.
Pit 1500–3850 mm, headroom 4500–6000 mm. Manufacturer — FUJIHD, China · Huzhou.
Liftoteka is an independent reference. We are not a dealer, representative, authorised partner or service centre of FUJIHD and do not sell this equipment. The name and trademark FUJIHD belong to their owner and are used solely to identify the equipment whose dimensions are listed. Data are taken from the manufacturer's open catalogues.
| Series | Shaft clear b3×d2, mm | Capacity | Car b1×d1, mm | Headroom h1, mm | Pit d3, mm | Speed | Clear door opening b2×h3 | Door type | Found an error? |
|---|---|---|---|---|---|---|---|---|---|
| FJ-OBS-SC | 2200 × 2185 | 630 kg · 8 pers. | 1100 × 1600 | 4500–4700 | 1500–1600 | 1 / 1.5 / 1.75 m/s | 700 × 2100 mm | centre opening | report |
| FJ-OBS-SC | 2300 × 2355 | 800 kg · 10 pers. | 1200 × 1800 | 4500–5100 | 1500–2000 | 1 / 1.5 / 1.75 / 2 / 2.5 m/s | 800 × 2100 mm | centre opening | report |
| FJ-OBS-SC | 2400 × 2535 | 1000 kg · 13 pers. | 1300 × 1950 | 4500–5100 | 1500–2000 | 1 / 1.5 / 1.75 / 2 / 2.5 m/s | 900 × 2100 mm | centre opening | report |
| FJ-OBS-SC | 2500 × 2600 | 1250 kg · 16 pers. | 1400 × 2150 | 4500–5100 | 1500–2000 | 1 / 1.5 / 1.75 / 2 / 2.5 m/s | 900 × 2100 mm | centre opening | report |
| FJ-OBS-SC | 2600 × 2600 | 1350 kg · 18 pers. | 1500 × 2150 | 4500–5100 | 1500–2000 | 1 / 1.5 / 1.75 / 2 / 2.5 m/s | 1000 × 2100 mm | centre opening | report |
| FJ-OBS-SC | 2600 × 2900 | 1600 kg · 21 pers. | 1500 × 2450 | 4500–6000 | 1500–3850 | 1 / 1.5 / 1.75 / 2 / 2.5 / 3 / 4 m/s | 1000 × 2100 mm | centre opening | report |
| FJ-OBS-SC | 2800 × 3050 | 2000 kg · 26 pers. | 1700 × 2600 | 4500–6000 | 1500–3850 | 1 / 1.5 / 1.75 / 2 / 3 / 4 m/s | 1100 × 2100 mm | centre opening | report |
Data source: Hengda Fuji Elevator Co., Ltd. (FUJIHD) catalogue, Construction Layout Drawing sections, pp. 16–19 (checked 18.09.2026). Added to the reference: 18.09.2026.
If a figure differs from the manufacturer's document, click “report” in the row — an email opens with the model and dimensions already filled in.
Shaft sizes are clear internal dimensions. “Per layout sheet” means the manufacturer
does not publish this value in the catalogue and provides it for a specific project.
Updated: 22 September 2026